What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Benjamin Moore Satin Impervo C235 -12/20/2001
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaPurpose of product.
Usage: Interior Satin FinishStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 2024101 Paragon Drive
Montvale NJ 07645
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :December 20, 2001 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :November 27, 2007 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2* 2 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 380
-
Warnings
WARNING! COMBUSTIBLE LIQUID AND VAPOR. VAPOR HARMFUL.
Contains: Stoddard Solvent and Xylene
CAUSES EYE, SKIN, NOSE AND THROAT IRRITATION
NOTICE: Repeated and prolonged exposure to solvents may lead to permanent brain and nervous system damage. Eye watering, headaches, nausea, dizziness and loss of coordination are signs that solvent levels are too high. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Keep away from heat and flame. Use only with adequate ventilation. Do not breathe vapors, spray mist or sanding dust. Avoid contact with eyes and prolonged or repeated contact with skin. Wear eye protection and gloves. To avoid breathing vapors or spray mist, open window and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear a properly fitted vapor/particulate respirator approved by NIOSH for use with paints or leave the area. In all cases follow respirator manufacturer -
Acute health effects
From MSDS:
PRIMARY ROUTE(S) OF ENTRY: DERMAL, INHALATION, INGESTION
EFFECTS OF OVEREXPOSURE:
Inhalation - Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache or nausea. Contact - Causes eye irritation.
Contact - Causes skin irritation.
Skin Absorption - Hazardous ingredients contained in this product have the capacity to be absorbed through the skin in sufficient quantities to cause systemic toxicity.
Ingestion - Irritation of the digestive tract and nervous system depression (drowsiness, dizziness, loss of coordination and fatigue).
Aspiration Hazard - This material can enter lungs during swallowing or vomiting and cause lung inflammation and damage. -
Chronic health effects
From MSDS:
Reports have associated permanent brain and nervous system damage with repeated, prolonged overexposure to solvents among persons engaged in the painting trade. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Inhalation statement: Sanding dust inhalation may cause lung damage. -
Carcinogenicity
Contains: Crystalline Silica which has been determined to be carcinogenic to humans (1) by IARC when in respirable form. Risk of cancer depends on duration and level of inhalation exposure to dust from sanding the dried paint or spray mist. IARC has classified Carbon Black as possibly carcinogenic for humans (2B). IARC has classified Ethyl Benzene as possibly carcinogenic for humans (2B). Contains Methyl Ethyl Ketoxime (MEKO) which has been identified as a potential animal liver carcinogen. Currently, MEKO is not listed as a potential carcinogen by IARC, NTP or OSHA. This product contains one or more reported carcinogens or suspected carcinogens which are noted NTP, IARC, or OSHA-Z. -
Handling information
Combustible - Keep away from heat and flame
Use only with adequate ventilation. Avoid prolonged contact with skin and breathing of vapor spray mist or sanding dust. Close container after each use. Keep out of reach of children. Do not take internally..
-
Disposal information
Conventional procedures in compliance with local, state and federal regulations. Do not incinerate sealed containers -
California Prop. 65 Warning
This product may contain small amounts of materials known to the State of California to cause cancer and reproductive harm. -
First Aid
Inhalation - Remove from hazard area, maintain breathing, call physician.
Skin Contact - Remove with soap and water.
Eye Contact - Flush immediately with large amounts of water. Call physician
Ingestion - Drink 1 or 2 glasses of water to dilute. DO NOT induce vomiting. Call physician.
-
CoC List
UN Global Harmonization Classification
